Reproducible resistive switching behavior in sputtered CeO2 polycrystalline films
檔案
本條目沒有附加檔案。
日期
2008-12-25
類型
系所
期刊名稱
SURFACE & COATINGS TECHNOLOGY
卷期與頁次
第 203 卷,頁 480–483
ISSN
0257-8972
語言
英文
摘要
Sputter-deposited CeO2 film in the metal-insulator-metal structure exhibits repeatable resistive switching behavior under voltage sweep. Based on the X-ray diffraction patterns and the cross-sectional scanning electron microscope image, the CeO2 film is polycrystalline with columnar grains perpendicular to the bottom electrode. Moreover, due to the symmetric device structure of Pt/CeO2/Pt, the resistive switching behavior is independent of bias polarity so that both positive and negative voltages can switch the device from high conducting state (ON-state) into low conducting state (OFF-state) and then back to ON-state, which is named non-polar resistive switching. The resistance ratio between two memory states is about five orders of magnitude, which is stable over 10(4) S at 0.3 V stress. in addition, the resistance ratio decreases with increasing the current compliance during forming process. The stability of ON-state, OFF-state, and as-deposited film state (the state before performing forming process) against temperature is also investigated in this study, showing that the OFF-state is less stable. (C) 2008 Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Lin, C.-Y., Lee, D.-Y., Wang, S.-Y., Lin, C.-C., & Tseng, T.-Y. (2008). Reproducible resistive switching behavior in sputtered CeO2 polycrystalline films. SURFACE & COATINGS TECHNOLOGY, 203, 480–483. https://doi.org/10.1016/j.surfcoat.2008.07.004
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/149646