Modeling and Control for Interleaved Voltage-Doubler Boost Converter
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
174 | en_US |
dc.citation.spage |
168 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Chen, Hung-Chi | en_US |
dc.contributor.author |
Chen, Tien-Hung | en_US |
dc.contributor.author |
Li, Chung-Yi | en_US |
dc.contributor.department |
電機工程學系 | zh_TW |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Department of Electrical and Computer Engineering | en_US |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2019-04-02T06:04:38Z | |
dc.date.available |
2019-04-02T06:04:38Z | |
dc.date.issued |
2018-01-01 | en_US |
dc.description.abstract |
In this paper, a new control method for a interleaved voltage-doubler boost converter is proposed to extend the operating range of duty ratio. Firstly, the analysis of the current-sharing mechanism is presented. Then, the averaging method is adopted to construct an average-behavior circuit model. After that, the modulation signal for current-sharing is particularly designed by amp-second balance. Besides, the average state-space equation of the voltage-doubler can be obtained. The open-loop transfer function can be derived from the small-signal analysis, and the proportional-integral (PI-type) controller parameters can be selected by Bode plots. All the algorithms are implemented in a Field Programmable Gate Array (FPGA) chip. The simulation and experimental results validate the inductor current-sharing capability of the proposed method. | en_US |
dc.identifier.issn |
2329-3721 | en_US |
dc.identifier.journal |
2018 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE) | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/150956 | |
dc.identifier.wosnumber |
WOS:000455187600025 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
voltage-doubler boost converter | en_US |
dc.subject |
amp-second balance | en_US |
dc.subject |
bode plot | en_US |
dc.subject |
field programmable gate array (FPGA) | en_US |
dc.title |
Modeling and Control for Interleaved Voltage-Doubler Boost Converter | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Chen, H.-C., Chen, T.-H., & Li, C.-Y. (2018). Modeling and Control for Interleaved Voltage-Doubler Boost Converter. 2018 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 168–174. https://ir.lib.nycu.edu.tw/handle/11536/150956
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/150956