Modeling and Control for Interleaved Voltage-Doubler Boost Converter

檔案

本條目沒有附加檔案。

日期

2018-01-01

期刊名稱

2018 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE)

卷期與頁次

頁 168–174

ISSN

2329-3721

語言

英文

摘要

In this paper, a new control method for a interleaved voltage-doubler boost converter is proposed to extend the operating range of duty ratio. Firstly, the analysis of the current-sharing mechanism is presented. Then, the averaging method is adopted to construct an average-behavior circuit model. After that, the modulation signal for current-sharing is particularly designed by amp-second balance. Besides, the average state-space equation of the voltage-doubler can be obtained. The open-loop transfer function can be derived from the small-signal analysis, and the proportional-integral (PI-type) controller parameters can be selected by Bode plots. All the algorithms are implemented in a Field Programmable Gate Array (FPGA) chip. The simulation and experimental results validate the inductor current-sharing capability of the proposed method.

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Chen, H.-C., Chen, T.-H., & Li, C.-Y. (2018). Modeling and Control for Interleaved Voltage-Doubler Boost Converter. 2018 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE), 168–174. https://ir.lib.nycu.edu.tw/handle/11536/150956

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/150956