High-Gain Patch-Fed 3D-Printing Fresnel Zone Plate Lens Antenna for 60-GHz Communications
檔案
本條目沒有附加檔案。
日期
2018-01-01
類型
系所
期刊名稱
2018 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING
卷期與頁次
頁 597–598
ISSN
1522-3965
語言
英文
摘要
This paper presents a high-gain Fresnel zone plate lens antenna designed for 60-GHz systems. Manufactured with the 3D printing technology and fed by a simple patch on the substrate, the proposed Fresnel lens antenna allows for low-cost fabrication and easy integration with planar circuitry. Experimental results show that the prototype antenna can achieve a 10-dB impedance bandwidth from 56.6 GHz to > 67 GHz and the peak gain of 14 similar to 20 dBi across the bandwidth, corresponding to gain enhancement of 9.2 similar to 10.9 dB.
所屬典藏
會議論文引用此條目
Chi, P.-L., Pao, C.-H., Huang, M.-H., & Yang, T. (2018). High-Gain Patch-Fed 3D-Printing Fresnel Zone Plate Lens Antenna for 60-GHz Communications. 2018 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING, 597–598. https://ir.lib.nycu.edu.tw/handle/11536/151090
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/151090