Two-dimensional numerical study of isotoxal-star polygonal cylinders in cross-flow

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2019-05-01

類型

期刊名稱

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS

卷期與頁次

第 188 卷,頁 125–135

ISSN

0167-6105

語言

英文

摘要

Numerical simulations have been conducted to investigate the flow structures and the force generation of two-dimensional regular and isotoxal-star polygonal cylinders in low Reynolds number (approximate to 150) cross-flow. The isotoxal-star polygons are essentially N-sided regular polygons with the addition of N V-grooves. Generally, transforming the regular polygon into the equivalent isotoxal-star polygon increases the normalized circulation, resulting in an increase in the magnitude of lift fluctuation and mean drag generation; this effect is sensitive to cylinder orientation. The influence of each V-groove on the overall flow structure and force generation of the isotoxal-star polygon is dependent on its placement and orientation, and the V-grooves fall into three main categories. Type I V-grooves are windward facing V-grooves containing the stagnation point; they are generally ineffective at enhancing force generation. Type II V-grooves are those upstream of the separation point but do not contain the stagnation point. They may enhance the magnitude of lift fluctuation if windward oriented, or yield negligible lift enhancement if oriented towards the transverse direction. Type III V-grooves are those downstream of the separation point, and they enhance the magnitude of lift fluctuation if they are oriented towards the vertical direction.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Lee, Y. J., Zhou, G., & Lua, K. B. (2019). Two-dimensional numerical study of isotoxal-star polygonal cylinders in cross-flow. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 188, 125–135. https://doi.org/10.1016/j.jweia.2019.02.020

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/151697