Hardening steels by the generation of transient phase using additive manufacturing
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
67 | en_US |
dc.citation.spage |
60 | en_US |
dc.citation.volume |
109 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Huang, E-Wen | en_US |
dc.contributor.author |
Lee, Soo Yeol | en_US |
dc.contributor.author |
Jain, Jayant | en_US |
dc.contributor.author |
Tong, Yang | en_US |
dc.contributor.author |
An, Ke | en_US |
dc.contributor.author |
Tsou, Nien-Ti | en_US |
dc.contributor.author |
Lam, Tu-Ngoc | en_US |
dc.contributor.author |
Yu, Dunji | en_US |
dc.contributor.author |
Chae, Hobyung | en_US |
dc.contributor.author |
Chen, Shi-Wei | en_US |
dc.contributor.author |
Chen, Shih-Min | en_US |
dc.contributor.author |
Chou, Hung-Sheng | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2019-06-03T01:08:34Z | |
dc.date.available |
2019-06-03T01:08:34Z | |
dc.date.issued |
2019-06-01 | en_US |
dc.description.abstract |
In the present work, the tensile properties of 15-5 PH steel fabricated by selective laser melting (SLM) were examined with respect to the transient austenite phase. Compared with the 8%-transient-phase sample, the 18%-transient-phase one shows higher ultimate tensile strength and relatively low yield strength, as well as hardening behavior. We conducted in-situ neutron-diffraction study to examine the microstructure evolution for mechanistic understanding. After applying the external load, most non-equilibrium, retained austenite in the 8% transient-phase sample transforms before the yield strength, whereas in the 18%-transient-phase sample only 50% of the austenite transforms. Accompanying with the phase transformation, a decrease in the dislocation density and the dislocation strain energy-assisted phase transformation of the ferrite phase are found in the 8%-transient-phase sample even before yielding, which, however, is not the case in the 18%-transient-phase sample. The study demonstrates the SLM enables tuning the amount of transient-phase ratio and coherency between phases to realize a mechanical property control for additive manufactured steel. | en_US |
dc.identifier.doi |
10.1016/j.intermet.2019.03.004 | en_US |
dc.identifier.issn |
0966-9795 | en_US |
dc.identifier.journal |
INTERMETALLICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.intermet.2019.03.004 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/151948 | |
dc.identifier.wosnumber |
WOS:000466821500008 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Neutron diffraction | en_US |
dc.subject |
Additive manufacturing | en_US |
dc.subject |
Selective laser melting | en_US |
dc.subject |
Stainless steel | en_US |
dc.subject |
Anisotropy | en_US |
dc.title |
Hardening steels by the generation of transient phase using additive manufacturing | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Huang, E.-W., Lee, S. Y., Jain, J., Tong, Y., An, K., Tsou, N.-T., Lam, T.-N., Yu, D., Chae, H., Chen, S.-W., Chen, S.-M., & Chou, H.-S. (2019). Hardening steels by the generation of transient phase using additive manufacturing. INTERMETALLICS, 109, 60–67. https://doi.org/10.1016/j.intermet.2019.03.004
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/151948