Hardening steels by the generation of transient phase using additive manufacturing

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2019-06-01

類型

期刊名稱

INTERMETALLICS

卷期與頁次

第 109 卷,頁 60–67

ISSN

0966-9795

語言

英文

摘要

In the present work, the tensile properties of 15-5 PH steel fabricated by selective laser melting (SLM) were examined with respect to the transient austenite phase. Compared with the 8%-transient-phase sample, the 18%-transient-phase one shows higher ultimate tensile strength and relatively low yield strength, as well as hardening behavior. We conducted in-situ neutron-diffraction study to examine the microstructure evolution for mechanistic understanding. After applying the external load, most non-equilibrium, retained austenite in the 8% transient-phase sample transforms before the yield strength, whereas in the 18%-transient-phase sample only 50% of the austenite transforms. Accompanying with the phase transformation, a decrease in the dislocation density and the dislocation strain energy-assisted phase transformation of the ferrite phase are found in the 8%-transient-phase sample even before yielding, which, however, is not the case in the 18%-transient-phase sample. The study demonstrates the SLM enables tuning the amount of transient-phase ratio and coherency between phases to realize a mechanical property control for additive manufactured steel.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Huang, E.-W., Lee, S. Y., Jain, J., Tong, Y., An, K., Tsou, N.-T., Lam, T.-N., Yu, D., Chae, H., Chen, S.-W., Chen, S.-M., & Chou, H.-S. (2019). Hardening steels by the generation of transient phase using additive manufacturing. INTERMETALLICS, 109, 60–67. https://doi.org/10.1016/j.intermet.2019.03.004

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/151948