Design and Fabrication of the Reliable GaN Based Vertical-Cavity Surface-Emitting Laser via Tunnel Junction
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.issue |
4 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.volume |
9 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Shen, Chih-Chiang | en_US |
dc.contributor.author |
Lu, Yun-Ting | en_US |
dc.contributor.author |
Yeh, Yen-Wei | en_US |
dc.contributor.author |
Chen, Cheng-Yuan | en_US |
dc.contributor.author |
Chen, Yu-Tzu | en_US |
dc.contributor.author |
Sher, Chin-Wei | en_US |
dc.contributor.author |
Lee, Po-Tsung | en_US |
dc.contributor.author |
Shih, Ya-Hsuan | en_US |
dc.contributor.author |
Lu, Tien-Chang | en_US |
dc.contributor.author |
Wu, Tingzhu | en_US |
dc.contributor.author |
Chiu, Ching-Hsueh | en_US |
dc.contributor.author |
Kuo, Hao-Chung | en_US |
dc.contributor.department |
電機學院 | zh_TW |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
College of Electrical and Computer Engineering | en_US |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2019-06-03T01:08:36Z | |
dc.date.available |
2019-06-03T01:08:36Z | |
dc.date.issued |
2019-04-01 | en_US |
dc.description.abstract |
In this study, we theoretically designed and experimentally fabricated an InGaN vertical-cavity surface-emitting laser (VCSEL) with a tunnel junction (TJ) structure. From numerical simulation results, the optical loss of the device can be reduced by a TJ structure. Additionally, the leakage current of the VCSEL with TJ structure was much smaller than that of the VCSEL with an Indium-Tin-Oxide (ITO) layer. We have been demonstrated that laser output performance is improved by using the TJ structure when compared to the typical VCSEL structure of the ITO layer. The output power obtained at 2.1 mW was enhanced by a factor of 3.5 by the successful reduction of threshold current density (J(th)) from 12 to 8.5 kA/cm(2), and the enlarged slope efficiency was due to less absorption in VCSEL with a TJ structure. Finally, the samples passed the high temperature (70 degrees C) and high operation current (1.5 x J(th)) test for over 500 h. | en_US |
dc.identifier.doi |
10.3390/cryst9040187 | en_US |
dc.identifier.issn |
2073-4352 | en_US |
dc.identifier.journal |
CRYSTALS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.3390/cryst9040187 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/151965 | |
dc.identifier.wosnumber |
WOS:000467300100007 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
InGaN | en_US |
dc.subject |
VCSEL | en_US |
dc.subject |
tunnel junction | en_US |
dc.title |
Design and Fabrication of the Reliable GaN Based Vertical-Cavity Surface-Emitting Laser via Tunnel Junction | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Shen, C.-C., Lu, Y.-T., Yeh, Y.-W., Chen, C.-Y., Chen, Y.-T., Sher, C.-W., Lee, P.-T., Shih, Y.-H., Lu, T.-C., Wu, T., Chiu, C.-H., & Kuo, H.-C. (2019). Design and Fabrication of the Reliable GaN Based Vertical-Cavity Surface-Emitting Laser via Tunnel Junction. CRYSTALS, 9(4), 0. https://doi.org/10.3390/cryst9040187
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/151965