Microstructure and mechanical properties evaluation of cathodic arc deposited CrCN/ZrCN multilayer coatings

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2019-09-30

類型

期刊名稱

JOURNAL OF ALLOYS AND COMPOUNDS

卷期與頁次

第 803 卷,頁 1005–1015

ISSN

0925-8388

語言

英文

摘要

For the development of advanced nanoscale multilayer protective coatings, proper design of microstructure and chemical composition of carbon containing sequential transition metal nitride nanolayers is an important issue. In this work, five different nanostructured CrCN/ZrCN multilayer coatings were deposited periodically by cathodic arc evaporation. The bilayer period of the CrCN/ZrCN multilayer coatings was kept at 20 nm. The C2H2 gas flow ratio was adjusted from 6.3 to 20.0% for achieving CrCN/ZrCN multilayer coatings with 2.3-4.2 at.% carbon content. Nanolaminated CrCN and ZrCN nitride layers and thin amorphous carbon nitride mixed nanolayers -5 nm thick were obtained as the carbon content reached 4.2 at.%. It was found that the hardness and adhesion quality were strongly improved by the carbon addition to the CrCN/ZrCN multilayer coatings. An increase of 2.6-4.6 GPa in hardness was found for the CrCN/ZrCN multilayer coatings due to the balance of solution hardening effect of carbon atoms and the softening by the amorphous mixed nanolayer. An optimal combination of high hardness, 28.9 GPa, and good adhesion, 41 N of upper critical load were achieved when the carbon content was 4.2 at.% for the CrCN/ZrCN multilayer coatings. (C) 2019 Elsevier B.V. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Huang, S.-H., Tong, C.-Y., Hsieh, T.-E., & Lee, J.-W. (2019). Microstructure and mechanical properties evaluation of cathodic arc deposited CrCN/ZrCN multilayer coatings. JOURNAL OF ALLOYS AND COMPOUNDS, 803, 1005–1015. https://doi.org/10.1016/j.jallcom.2019.06.370

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/152680