Analysis and design of wideband active power splitter with interleaf transmission line topology
檔案
本條目沒有附加檔案。
日期
2019-11-01
類型
系所
期刊名稱
IET CIRCUITS DEVICES & SYSTEMS
卷期與頁次
第 13 卷第 8 期,頁 1262–1266
ISSN
1751-858X
語言
英文
摘要
This article proposes a new wideband active power splitter design where the gain cells along the input transmission line are arranged in interleaf rather than the conventional parallel style, thus the circuit's high-frequency performance can be greatly improved. Both theoretical analysis and circuit simulation have been carried out; as a demonstration, parallel and interleaf active power splitters are designed using 0.1 mu m GaAs pseudo-morphic heterostructure field effect transistors (GaAs pHEMT) process and measured on-wafer. The results clearly indicate the superiority of the interleaf topology. A 40 GHz interleaf active power splitter in 90 nm complementary metal-oxide-semiconductor (CMOS) is then presented where the magnitude and phase imbalance between the two output ports are 0.15 dB and 2.6 degrees at 20 GHz, and 0.16 dB and 14 degrees at 40 GHz. The output-port isolation is better than 30 dB across the whole frequency range.
關鍵詞
III-V semiconductorsCMOS integrated circuitsgallium arsenideHEMT integrated circuitstransmission linesfield effect MIMICnetwork topologyinterleaf topologyinterleaf transmission line topologyhigh-frequency performancewideband active power splitterinterleaf active power splittercircuit simulationGaAs pHEMT processCMOS integrated circuitoutput-port isolationsize 01 mumfrequency 400 GHzsize 900 nmfrequency 20GaAs所屬典藏
期刊論文引用此條目
Huang, C.-Y., Hu, R., Niu, D.-C., & Chang, C.-Y. (2019). Analysis and design of wideband active power splitter with interleaf transmission line topology. IET CIRCUITS DEVICES & SYSTEMS, 13(8), 1262–1266. https://doi.org/10.1049/iet-cds.2018.5579
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153351