Built-In Self-Test/Repair Methodology for Multiband RF-Interconnected TSV 3D Integration
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
71 | en_US |
dc.citation.issue |
6 | en_US |
dc.citation.spage |
63 | en_US |
dc.citation.volume |
36 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Cheng, Shu-Feng | en_US |
dc.contributor.author |
Huang, Po-Tsang | en_US |
dc.contributor.author |
Wang, Li-Chun | en_US |
dc.contributor.author |
Chang, Mau-Chung Frank | en_US |
dc.contributor.department |
交大名義發表 | zh_TW |
dc.contributor.department |
電機資訊學士班 | zh_TW |
dc.contributor.department |
電機工程學系 | zh_TW |
dc.contributor.department |
國際半導體學院 | zh_TW |
dc.contributor.department |
National Chiao Tung University | en_US |
dc.contributor.department |
Undergraduate Honors Program of Electrical Engineering and Computer Science | en_US |
dc.contributor.department |
Department of Electrical and Computer Engineering | en_US |
dc.contributor.department |
International College of Semiconductor Technology | en_US |
dc.date.accessioned |
2020-01-02T00:04:24Z | |
dc.date.available |
2020-01-02T00:04:24Z | |
dc.date.issued |
2019-12-01 | en_US |
dc.description.abstract |
Editor's note: Multiband radio-frequency interconnect (MRFI) is an emerging technology to achieve low-latency and energy-efficient on-chip communication. This article proposes a BIST method to improve the reliability of MRFI-based design. -Partha Pratim Pande, Washington State University | en_US |
dc.identifier.doi |
10.1109/MDAT.2019.2932935 | en_US |
dc.identifier.issn |
2168-2356 | en_US |
dc.identifier.journal |
IEEE DESIGN & TEST | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/MDAT.2019.2932935 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/153438 | |
dc.identifier.wosnumber |
WOS:000499992900007 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Through-silicon vias | en_US |
dc.subject |
Built-in self-test | en_US |
dc.subject |
Maintenance engineering | en_US |
dc.subject |
Three-dimensional displays | en_US |
dc.subject |
Circuit faults | en_US |
dc.subject |
Bandwidth | en_US |
dc.subject |
Frequency division multiplexing | en_US |
dc.subject |
multiband RF-Interconnect | en_US |
dc.subject |
test methodology | en_US |
dc.subject |
TSV density | en_US |
dc.subject |
yield improvement | en_US |
dc.subject |
PRBS | en_US |
dc.subject |
phase error | en_US |
dc.subject |
BIST | en_US |
dc.subject |
R | en_US |
dc.subject |
e-fuse | en_US |
dc.title |
Built-In Self-Test/Repair Methodology for Multiband RF-Interconnected TSV 3D Integration | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Cheng, S.-F., Huang, P.-T., Wang, L.-C., & Chang, M.-C. F. (2019). Built-In Self-Test/Repair Methodology for Multiband RF-Interconnected TSV 3D Integration. IEEE DESIGN & TEST, 36(6), 63–71. https://doi.org/10.1109/MDAT.2019.2932935
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153438