A Microwatt Dual-Mode Electrochemical Sensing Current Readout With Current-Reducer Ramp Waveform Generation

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2019-12-01

類型

期刊名稱

IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS

卷期與頁次

第 13 卷第 6 期,頁 1163–1174

ISSN

1932-4545

語言

英文

摘要

An electrochemical sensing chip with an integrated current-reducer pattern generator and a current-mirror based low-noise chopper-stabilization potentiostat circuit is presented. The pattern generator, utilizing the current reducer technique and pseudo resistors, creates a sub-Hz ramp signal for the cyclic voltammetric (CV) measurement without large-size passive components. The proposed design adopts the chopper-stabilization and low-noise biasing technique for the potentiostat and a counter-based time-to-digital converter to reduce the amplitude noise effects and to convert the sensing current signal to digital codes for further data processing. The design is fabricated using a 0.18-m CMOS process and achieves a 41pA current resolution in the current range of 5A while maintaining the R-2 linearity of 0.998. The system consumes 16W from a 1.2V supply when a 5A sensing current is detected. The power efficiency of the readout interface is 0.31, and the sensing current dynamic range is 108dB. The design is fully integrated into a single chip and is successfully tested in the dual-mode (CA/CV) measurements with commercial gold electrodes in a potassium ferricyanide solution in sub-millimolar concentrations.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Chen, Y.-C., Lu, S.-Y., & Liao, Y.-T. (2019). A Microwatt Dual-Mode Electrochemical Sensing Current Readout With Current-Reducer Ramp Waveform Generation. IEEE TRANSACTIONS ON BIOMEDICAL CIRCUITS AND SYSTEMS, 13(6), 1163–1174. https://doi.org/10.1109/TBCAS.2019.2936373

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153543