Adhesion Properties of Electroplating Process Between Polyimide and Metal Layer for Polymer/Metal Hybrid Bonding
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
175 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
168 | en_US |
dc.citation.volume |
10 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Lu, Cheng-Hsien | en_US |
dc.contributor.author |
Yang, Yi-Lun | en_US |
dc.contributor.author |
Chen, Chiao-Pei | en_US |
dc.contributor.author |
Tsai, Bin-Ling | en_US |
dc.contributor.author |
Chen, Kuan-Neng | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2020-03-02T03:23:28Z | |
dc.date.available |
2020-03-02T03:23:28Z | |
dc.date.issued |
2020-01-01 | en_US |
dc.description.abstract |
This article investigates the adhesion properties between the polyimide layers and the Ti/Cu layer after the electroplating process. The adhesion strength was evaluated by the four-point bending system, and the influence factors were confirmed by using different electroplating times and currents. The fracture interface after the four-point bending measurement was characterized, and the interface spectrum between the polyimide and the Ti/Cu layer was analyzed. The results showed that the modified polyimide-like material has better adhesion performance than the conventional polyimide. Moreover, the mechanism of degradation was proposed. As a result, the modified polyimide-like material can be applied in electroplating, a redistribution layer (RDL) formation, and packaging at the back-end-of-line processes. | en_US |
dc.identifier.doi |
10.1109/TCPMT.2019.2942128 | en_US |
dc.identifier.issn |
2156-3950 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCPMT.2019.2942128 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/153738 | |
dc.identifier.wosnumber |
WOS:000508385200020 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Polyimides | en_US |
dc.subject |
Adhesives | en_US |
dc.subject |
Plating | en_US |
dc.subject |
Metals | en_US |
dc.subject |
Packaging | en_US |
dc.subject |
Adhesion | en_US |
dc.subject |
electroplating | en_US |
dc.subject |
polyimide | en_US |
dc.subject |
X-ray photoelectron spectroscopy (XPS) | en_US |
dc.title |
Adhesion Properties of Electroplating Process Between Polyimide and Metal Layer for Polymer/Metal Hybrid Bonding | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Lu, C.-H., Yang, Y.-L., Chen, C.-P., Tsai, B.-L., & Chen, K.-N. (2020). Adhesion Properties of Electroplating Process Between Polyimide and Metal Layer for Polymer/Metal Hybrid Bonding. IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 10(1), 168–175. https://doi.org/10.1109/TCPMT.2019.2942128
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153738