Modified processes capability assessment with dynamic mean shift

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

1970-01-01

類型

期刊名稱

QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL

ISSN

0748-8017

語言

英文

摘要

Rapid advancements in manufacturing technology have seen electronic products becoming lighter and thinner. This has led to production yield requirements of sawing processes in the semiconductor industry becoming increasingly strict. For sawing processes requiring a very low fraction of defective, the process capability index C-pk is widely applied for production yield measurement under the assumption of process stability. However, in practice, even when the typical control charts are implemented, dynamic and unobserved natures of the actual process mean shift may occur. Since the trial control limits are established with reference to random samples, the associated performances are also with uncertainty because of sampling error. In this paper, we investigate the effects of parameter estimation error on the development of the phase I control chart and further compare three methods with various estimators for the process standard deviation. Then, we tabulate the modified adjustment magnitudes for the dynamic C-pk under various subgroup sizes and sample sizes. On the basis of the simulation results, the proposed method can avoid overestimating the true process capability and make more trustworthy decisions. Finally, for demonstration purposes, an application of process capability measures for a sawing process is presented.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Wu, C.-H. (1970). Modified processes capability assessment with dynamic mean shift. QUALITY AND RELIABILITY ENGINEERING INTERNATIONAL, 0. https://doi.org/10.1002/qre.2628

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153780