Fabrication of functionally radial graded metallic foam
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
0 | en_US |
dc.citation.spage |
0 | en_US |
dc.citation.volume |
264 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Zhang Yi | en_US |
dc.contributor.author |
Zang Xiao-yun | en_US |
dc.contributor.author |
Wang Ke | en_US |
dc.contributor.author |
He Si-yuan | en_US |
dc.contributor.author |
Liu Jia-gui | en_US |
dc.contributor.author |
Zhao Wei | en_US |
dc.contributor.author |
Gong Xiao-lu | en_US |
dc.contributor.author |
Yu Jin | en_US |
dc.contributor.department |
應用藝術研究所 | zh_TW |
dc.contributor.department |
Institute of Applied Arts | en_US |
dc.date.accessioned |
2020-05-05T00:01:28Z | |
dc.date.available |
2020-05-05T00:01:28Z | |
dc.date.issued |
2020-04-01 | en_US |
dc.description.abstract |
Radial graded structures in biological materials, e.g. bones, are lightweight and exhibit good mechanical properties. This paper developed a novel method to fabricate a functionally radial graded aluminum foam. In this method, a sequential solidification was applied from the periphery to the inner on the foaming aluminum melt to obtain a radial gradient. The graded foams were then served as fillers for thin-walled tubes. Quasi-static compressive tests were conducted on the foams and foam-filled tubes. The results indicated that the graded foam-filled tubes exhibited improved crushing resistance and specific energy absorption, compared to the uniform foam-filled tube with similar weight. (C) 2019 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.matlet.2019.127292 | en_US |
dc.identifier.issn |
0167-577X | en_US |
dc.identifier.journal |
MATERIALS LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.matlet.2019.127292 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/153900 | |
dc.identifier.wosnumber |
WOS:000513964300018 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Melt foam | en_US |
dc.subject |
Foam-filled tube | en_US |
dc.subject |
Functionally graded foam | en_US |
dc.subject |
Metallic composites | en_US |
dc.subject |
Cast | en_US |
dc.title |
Fabrication of functionally radial graded metallic foam | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Zhang Yi, Zang Xiao-yun, Wang Ke, He Si-yuan, Liu Jia-gui, Zhao Wei, Gong Xiao-lu, & Yu Jin (2020). Fabrication of functionally radial graded metallic foam. MATERIALS LETTERS, 264, 0. https://doi.org/10.1016/j.matlet.2019.127292
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153900