Fabrication of functionally radial graded metallic foam
檔案
本條目沒有附加檔案。
日期
2020-04-01
類型
系所
期刊名稱
MATERIALS LETTERS
卷期與頁次
第 264 卷
ISSN
0167-577X
語言
英文
摘要
Radial graded structures in biological materials, e.g. bones, are lightweight and exhibit good mechanical properties. This paper developed a novel method to fabricate a functionally radial graded aluminum foam. In this method, a sequential solidification was applied from the periphery to the inner on the foaming aluminum melt to obtain a radial gradient. The graded foams were then served as fillers for thin-walled tubes. Quasi-static compressive tests were conducted on the foams and foam-filled tubes. The results indicated that the graded foam-filled tubes exhibited improved crushing resistance and specific energy absorption, compared to the uniform foam-filled tube with similar weight. (C) 2019 Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Zhang Yi, Zang Xiao-yun, Wang Ke, He Si-yuan, Liu Jia-gui, Zhao Wei, Gong Xiao-lu, & Yu Jin (2020). Fabrication of functionally radial graded metallic foam. MATERIALS LETTERS, 264, 0. https://doi.org/10.1016/j.matlet.2019.127292
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/153900