Evaluation of Metal/Polymer Adhesion and Highly Reliable Four-Point Bending Test Using Stealth Dicing Method in 3-D Integration
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
962 | en_US |
dc.citation.issue |
6 | en_US |
dc.citation.spage |
956 | en_US |
dc.citation.volume |
10 | en_US |
dc.citation.woscount |
0 | en_US |
dc.contributor.author |
Yang, Yi-Lun | en_US |
dc.contributor.author |
Ito, Hiroyuki | en_US |
dc.contributor.author |
Kim, Young Suk | en_US |
dc.contributor.author |
Ohba, Takayuki | en_US |
dc.contributor.author |
Chen, Kuan-Neng | en_US |
dc.contributor.department |
交大名義發表 | zh_TW |
dc.contributor.department |
National Chiao Tung University | en_US |
dc.date.accessioned |
2020-10-05T01:59:48Z | |
dc.date.available |
2020-10-05T01:59:48Z | |
dc.date.issued |
2020-06-01 | en_US |
dc.description.abstract |
The adhesion between metal and polymer layer was studied using four-point bending tests. It was shown that as the annealing temperature increased, oxidation binding increased, which decreased adhesion and reduced the value. A new four-point bending test sample prepared using the stealth dicing method with a 100 & x0025; success rate was proposed for the first time. With samples prepared with stealth dicing, the region where crack extension occurred was smaller after the stress test. Less crack extension generated less loading on the samples. Owing to the coefficient of thermal expansion (CTE) mismatch after increasing the temperature in a highly accelerated stress test (HAST), a void formed in stealth dicing was made close to the interface between the silicon layer and the polymer layer after the stress test, and less crack extension occurred compared with samples kept at room temperature. The smaller loading force guarantees much more stable measurement with a higher success rate after the stress tests. The stealth dicing method can be applied to other structures, such as redistribution layers (RDLs). | en_US |
dc.identifier.doi |
10.1109/TCPMT.2020.2968561 | en_US |
dc.identifier.issn |
2156-3950 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TCPMT.2020.2968561 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/154923 | |
dc.identifier.wosnumber |
WOS:000541132400004 | en_US |
dc.language.iso |
en_US | en_US |
dc.subject |
Polymers | en_US |
dc.subject |
Adhesives | en_US |
dc.subject |
Diamond | en_US |
dc.subject |
Silicon | en_US |
dc.subject |
Curing | en_US |
dc.subject |
Annealing | en_US |
dc.subject |
3-D integrated circuit (3-D IC) | en_US |
dc.subject |
four-point bending | en_US |
dc.subject |
polymer adhesion | en_US |
dc.title |
Evaluation of Metal/Polymer Adhesion and Highly Reliable Four-Point Bending Test Using Stealth Dicing Method in 3-D Integration | en_US |
dc.type |
Article | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 期刊論文
引用此條目
Yang, Y.-L., Ito, H., Kim, Y. S., Ohba, T., & Chen, K.-N. (2020). Evaluation of Metal/Polymer Adhesion and Highly Reliable Four-Point Bending Test Using Stealth Dicing Method in 3-D Integration. IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 10(6), 956–962. https://doi.org/10.1109/TCPMT.2020.2968561
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/154923