Full metadata record
DC FieldValueLanguage
dc.contributor.authorChang, Bo-Yangen_US
dc.contributor.authorJou, Christina F.en_US
dc.date.accessioned2014-12-08T15:25:19Z-
dc.date.available2014-12-08T15:25:19Z-
dc.date.issued2005-01-01en_US
dc.identifier.isbn0-7803-9433-Xen_US
dc.identifier.issnen_US
dc.identifier.urihttp://hdl.handle.net/11536/17707-
dc.description.abstractA low-voltage, low-power ultra-wideband (UWB) low-noise amplifier (LNA) for IEEE 802.15.3a is presented. A simplified Chebyshev filter is used to achieve the input broadband matching. This input network has lower complexity and good reflected coefficient from 3.1GHz to 10.6GHz. An output-matching buffer is designed specially to match for maintaining high gain at upper frequency. Therefore, it can both achieve flat gain over the whole bandwidth and generate more output current. The LNA is simulated based on TSMC 0.18 mu m mixed signal/RF process. With only 1V bias voltage, the LNA can achieve power flat gain of 10dB with input matching of -9.76dB; the minimum noise figure 3.7dB; and input third-order-intercept point (IIP3) of -1dB. The power dissipation is only 7.2mW.en_US
dc.language.isoen_USen_US
dc.titleDesign of a 3.1-10.6GHz low-voltage, low-power CMOS low-noise amplifier for ultra-wideband receiversen_US
dc.typeProceedings Paperen_US
dc.identifier.journal2005 ASIA-PACIFIC MICROWAVE CONFERENCE PROCEEDINGS, VOLS 1-5en_US
dc.citation.volumeen_US
dc.citation.issueen_US
dc.citation.spage1066en_US
dc.citation.epage1069en_US
dc.contributor.department電信工程研究所zh_TW
dc.contributor.departmentInstitute of Communications Engineeringen_US
Appears in Collections:Conferences Paper