Fault detection and isolation for plasma etching using model-based approach
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
214 | en_US |
dc.citation.spage |
208 | en_US |
dc.contributor.author |
Cheng, MH | en_US |
dc.contributor.author |
Huan-Shin, L | en_US |
dc.contributor.author |
Lin, SY | en_US |
dc.contributor.author |
Liu, CH | en_US |
dc.contributor.author |
Lee, WY | en_US |
dc.contributor.author |
Tsai, CH | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:26:00Z | |
dc.date.available |
2014-12-08T15:26:00Z | |
dc.date.issued |
2003 | en_US |
dc.description.abstract |
A fault detection and isolation system using model-based approach for the chamber pressure of plasma etching is developed. The dynamics of chamber pressure is modeled as a linear multiple-input-single-output closed-loop system and the model parameters are extracted by the system identification technique. The obtained parameters are then converted to physically meaningful features for detecting and isolating faults. The fuzzy inference and Dempster-Shafer evidence combining techniques are employed to detect and isolate fault from the features. The system has been evaluated by the measured data that are collected via SECS-II from the employed Lam-490 plasma etcher for processing practical products. The test results are satisfactory for a large amount of practical data and extensive computer simulations. | en_US |
dc.identifier.isbn |
0-7803-7673-0 | en_US |
dc.identifier.issn |
1078-8743 | en_US |
dc.identifier.journal |
ASCMC 2003: IEEE/SEMI (R) ADVANCED SEMICONDUCTOR MANUFACTURING CONFERENCE AND WORKSHOP, PROCEEDINGS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/18432 | |
dc.identifier.wosnumber |
WOS:000182993100036 | |
dc.language.iso |
en_US | en_US |
dc.subject |
fault detection and isolation | en_US |
dc.subject |
plasma etching | en_US |
dc.subject |
system identification | en_US |
dc.subject |
fuzzy inference | en_US |
dc.subject |
Dempster-Shafer technique | en_US |
dc.title |
Fault detection and isolation for plasma etching using model-based approach | en_US |
dc.type |
Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Cheng, M., Huan-Shin, L., Lin, S., Liu, C., Lee, W., & Tsai, C. (2003). Fault detection and isolation for plasma etching using model-based approach. ASCMC 2003: IEEE/SEMI (R) ADVANCED SEMICONDUCTOR MANUFACTURING CONFERENCE AND WORKSHOP, PROCEEDINGS, 208–214. https://ir.lib.nycu.edu.tw/handle/11536/18432
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/18432