Study on bending behaviour of nickeltitanium rotary endodontic instruments by analytical and numerical analyses

檔案

日期

2013-04-01

類型

期刊名稱

INTERNATIONAL ENDODONTIC JOURNAL

卷期與頁次

第 46 卷第 4 期,頁 379–388

ISSN

0143-2885

語言

英文

摘要

Tsao CC, Liou JU, Wen PH, Peng CC, Liu TS. Study on bending behaviour of nickel-titanium rotary endodontic instruments by analytical and numerical analyses. International Endodontic Journal, 46, 379-388, 2013. Aim To develop analytical models and analyse the stress distribution and flexibility of nickeltitanium (NiTi) instruments subject to bending forces. Methodology The analytical method was used to analyse the behaviours of NiTi instruments under bending forces. Two NiTi instruments (RaCe and Mani NRT) with different cross-sections and geometries were considered. Analytical results were derived using EulerBernoulli nonlinear differential equations that took into account the screw pitch variation of these NiTi instruments. In addition, the nonlinear deformation analysis based on the analytical model and the finite element nonlinear analysis was carried out. Numerical results are obtained by carrying out a finite element method. Results According to analytical results, the maximum curvature of the instrument occurs near the instrument tip. Results of the finite element analysis revealed that the position of maximum von Mises stress was near the instrument tip. Therefore, the proposed analytical model can be used to predict the position of maximum curvature in the instrument where fracture may occur. Finally, results of analytical and numerical models were compatible. Conclusion The proposed analytical model was validated by numerical results in analysing bending deformation of NiTi instruments. The analytical model is useful in the design and analysis of instruments. The proposed theoretical model is effective in studying the flexibility of NiTi instruments. Compared with the finite element method, the analytical model can deal conveniently and effectively with the subject of bending behaviour of rotary NiTi endodontic instruments.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Tsao, C. C., Liou, J. U., Wen, P. H., Peng, C. C., & Liu, T. S. (2013). Study on bending behaviour of nickeltitanium rotary endodontic instruments by analytical and numerical analyses. INTERNATIONAL ENDODONTIC JOURNAL, 46(4), 379–388. https://doi.org/10.1111/iej.12025

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/21366