Fabrication and ferroelectric properties of BiFeO3/LaNiO3 artificial superlattice structures grown by radio-frequency magnetron-sputtering
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
70 | en_US |
dc.citation.issue |
en_US | |
dc.citation.spage |
66 | en_US |
dc.citation.volume |
529 | en_US |
dc.citation.woscount |
1 | |
dc.contributor.author |
Liu, Yen-Ting | en_US |
dc.contributor.author |
Chiu, Shang-Jui | en_US |
dc.contributor.author |
Lee, Hsin-Yi | en_US |
dc.contributor.author |
Chen, San-Yuan | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
加速器光源科技與應用學位學程 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.contributor.department |
Master and Ph.D. Program for Science and Technology of Accelrrator Light Source | en_US |
dc.date.accessioned |
2014-12-08T15:29:54Z | |
dc.date.available |
2014-12-08T15:29:54Z | |
dc.date.issued |
2013-02-01 | en_US |
dc.description.abstract |
Symmetric superlattice structures of multiferroic BiFeO3 and conductive LaNiO3 sublayers were grown on a Nb-doped SrTiO3 substrate with radio-frequency magnetron-sputtering. The formation of a superlattice structure was confirmed from the appearance of satellite lines on both sides of the main line in the X-ray diffraction pattern. X-ray measurements show that these superlattice films become subject to greater tensile stress along the c-axis and to increased compressive stress parallel to the surface plane with a decreasing thickness of the sublayer. The smaller is the thickness of the sublayer, the greater is the crystalline quality and the strain state. The hysteresis loops show a large leakage current at frequencies of 0.5 and 1 kHz; the polarization decreases with an increasing frequency. (C) 2012 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.tsf.2012.07.073 | en_US |
dc.identifier.issn |
0040-6090 | en_US |
dc.identifier.journal |
THIN SOLID FILMS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.tsf.2012.07.073 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/21446 | |
dc.identifier.wosnumber |
WOS:000315928000016 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Superlattice | en_US |
dc.subject |
RF sputtering | en_US |
dc.subject |
X-ray scattering | en_US |
dc.title |
Fabrication and ferroelectric properties of BiFeO3/LaNiO3 artificial superlattice structures grown by radio-frequency magnetron-sputtering | en_US |
dc.type |
Article | en_US |
檔案
- 000315928000016.pdf (1.21 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Liu, Y.-T., Chiu, S.-J., Lee, H.-Y., & Chen, S.-Y. (2013). Fabrication and ferroelectric properties of BiFeO3/LaNiO3 artificial superlattice structures grown by radio-frequency magnetron-sputtering. THIN SOLID FILMS, 529, 66–70. https://doi.org/10.1016/j.tsf.2012.07.073
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/21446