Fabrication and ferroelectric properties of BiFeO3/LaNiO3 artificial superlattice structures grown by radio-frequency magnetron-sputtering

檔案

日期

2013-02-01

類型

期刊名稱

THIN SOLID FILMS

卷期與頁次

第 529 卷,頁 66–70

ISSN

0040-6090

語言

英文

摘要

Symmetric superlattice structures of multiferroic BiFeO3 and conductive LaNiO3 sublayers were grown on a Nb-doped SrTiO3 substrate with radio-frequency magnetron-sputtering. The formation of a superlattice structure was confirmed from the appearance of satellite lines on both sides of the main line in the X-ray diffraction pattern. X-ray measurements show that these superlattice films become subject to greater tensile stress along the c-axis and to increased compressive stress parallel to the surface plane with a decreasing thickness of the sublayer. The smaller is the thickness of the sublayer, the greater is the crystalline quality and the strain state. The hysteresis loops show a large leakage current at frequencies of 0.5 and 1 kHz; the polarization decreases with an increasing frequency. (C) 2012 Elsevier B.V. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Liu, Y.-T., Chiu, S.-J., Lee, H.-Y., & Chen, S.-Y. (2013). Fabrication and ferroelectric properties of BiFeO3/LaNiO3 artificial superlattice structures grown by radio-frequency magnetron-sputtering. THIN SOLID FILMS, 529, 66–70. https://doi.org/10.1016/j.tsf.2012.07.073

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/21446