Charge Quantity Influence on Resistance Switching Characteristic During Forming Process
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
504 | en_US |
dc.citation.issue |
4 | en_US |
dc.citation.spage |
502 | en_US |
dc.citation.volume |
34 | en_US |
dc.citation.woscount |
17 | |
dc.contributor.author |
Chu, Tian-Jian | en_US |
dc.contributor.author |
Chang, Ting-Chang | en_US |
dc.contributor.author |
Tsai, Tsung-Ming | en_US |
dc.contributor.author |
Wu, Hsing-Hua | en_US |
dc.contributor.author |
Chen, Jung-Hui | en_US |
dc.contributor.author |
Chang, Kuan-Chang | en_US |
dc.contributor.author |
Young, Tai-Fa | en_US |
dc.contributor.author |
Chen, Kai-Hsang | en_US |
dc.contributor.author |
Syu, Yong-En | en_US |
dc.contributor.author |
Chang, Geng-Wei | en_US |
dc.contributor.author |
Chang, Yao-Feng | en_US |
dc.contributor.author |
Chen, Min-Chen | en_US |
dc.contributor.author |
Lou, Jyun-Hao | en_US |
dc.contributor.author |
Pan, Jhih-Hong | en_US |
dc.contributor.author |
Chen, Jian-Yu | en_US |
dc.contributor.author |
Tai, Ya-Hsiang | en_US |
dc.contributor.author |
Ye, Cong | en_US |
dc.contributor.author |
Wang, Hao | en_US |
dc.contributor.author |
Sze, Simon M. | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
光電工程學系 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.contributor.department |
Department of Photonics | en_US |
dc.date.accessioned |
2014-12-08T15:30:22Z | |
dc.date.available |
2014-12-08T15:30:22Z | |
dc.date.issued |
2013-04-01 | en_US |
dc.description.abstract |
In this letter, we presented that the charge quantity is the critical factor for forming process. Forming is a pivotal process in resistance random access memory to activate the resistance switching behavior. However, overforming would lead to device damage. In general, the overshoot current has been considered as a degradation reason during the forming process. In this letter, the quantity of charge through the switching layer has been proven as the key element in the formation of the conduction path. Ultrafast pulse forming can form a discontinuous conduction path to reduce the operation power. | en_US |
dc.identifier.doi |
10.1109/LED.2013.2242843 | en_US |
dc.identifier.issn |
0741-3106 | en_US |
dc.identifier.journal |
IEEE ELECTRON DEVICE LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/LED.2013.2242843 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/21712 | |
dc.identifier.wosnumber |
WOS:000316813100009 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Forming process | en_US |
dc.subject |
hafnium oxide (HfO2) | en_US |
dc.subject |
nonvolatile memory | en_US |
dc.subject |
resistance switching | en_US |
dc.title |
Charge Quantity Influence on Resistance Switching Characteristic During Forming Process | en_US |
dc.type |
Article | en_US |
檔案
- 000316813100009.pdf (378.5 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Chu, T.-J., Chang, T.-C., Tsai, T.-M., Wu, H.-H., Chen, J.-H., Chang, K.-C., Young, T.-F., Chen, K.-H., Syu, Y.-E., Chang, G.-W., Chang, Y.-F., Chen, M.-C., Lou, J.-H., Pan, J.-H., Chen, J.-Y., Tai, Y.-H., Ye, C., Wang, H., & Sze, S. M. (2013). Charge Quantity Influence on Resistance Switching Characteristic During Forming Process. IEEE ELECTRON DEVICE LETTERS, 34(4), 502–504. https://doi.org/10.1109/LED.2013.2242843
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/21712