Performance Analysis on Planar Micro PDMS Proton Exchange Membrane Fuel Cell Stack

檔案

本條目沒有附加檔案。

日期

2011-06-01

類型

期刊名稱

JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS

卷期與頁次

第 32 卷第 3 期,頁 189–198

ISSN

0257-9731

語言

英文

摘要

The objective of this study is to develop a micro proton exchange membrane fuel cell (PEMFC) stack, in which a flow field plate in each cell is made of polydimethyl-siloxane (PDMS) and manufactured by micro-molding technology. A four-cell micro PEMFC stack in series with a volume of 12 cm x 4.5 cm x 1.2 cm is constructed and tested. The active area of a membrane electrode assembly (MEA) is 2 cm x 2 cm in each individual PEMFC, and the platinum loadings at anode and cathode are 0.3 and 0.5 mg/cm(2), respectively. A series of performance experiments were carried out. Experimental parameters included clamping force and fuel supply condition. Durability tests were carried out as well. Experimental results showed that an appropriate clamping torque range should be considered carefully to enhance performance without narrowing down fuel flow channels. Under a torque of 2.0 kgf . cm, peak power density for this stack is 122.5 mW/cm(2) at 2.0 V. Increase in fuel flow rate is not the best way to improve concentration polarization in this air-breathing stack experiment because of limited air supply, and each cell in the same stack has a different performance under the present arrangement. At present, such stack can maintain a stable power output for a long time (up to 14 hours).

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Peng, R.-G., Chen, T.-Y., Hsu, Y.-J., & Chen, C.-H. (2011). Performance Analysis on Planar Micro PDMS Proton Exchange Membrane Fuel Cell Stack. JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 32(3), 189–198. https://ir.lib.nycu.edu.tw/handle/11536/22902

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/22902