Structure and properties of gas-nitrided nanostructured FeAlMnC alloy
檔案
- 000327684100037.pdf (1.34 MB, Adobe PDF)
日期
2013-12-16
類型
期刊名稱
MATERIALS CHEMISTRY AND PHYSICS
卷期與頁次
第 143 卷第 1 期,頁 271–274
ISSN
0254-0584
語言
英文
摘要
The as-quenched Fe-9Al-28Mn-1.8C (in wt.%) alloy was directly gas-nitrided at 500 degrees C for 8 h, resulting in a similar to 30 mu m-thick nitrided layer. The nitrided layer consists predominantly of nano-crystalline AlN with a small amount of Fe4N. The nitrogen concentration at surface was extremely high up to similar to 17 wt.% (similar to 41 at.%). Consequently, the surface microhardness (1700 Hv), substrate hardness (550 Hv), ductility (33.2%) and corrosion resistance in 3.5% NaCl solution of the present gas-nitrided alloy are far superior to those obtained previously for the optimally gas-nitrided or plasma-nitrided high-strength alloy steels, as well as martensitic and precipitation-hardening stainless steels. Moreover, it is very novel that the nitrided layer almost remained coherent and adhered well with the matrix after tensile test. Additionally, the present gas nitriding appeared to overcome the edge effects commonly encountered in plasma nitriding treatments for metals. Crown Copyright (C) 2013 Published by Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Chen, P.-C., Chao, C.-G., Juang, J.-Y., & Liu, T.-F. (2013). Structure and properties of gas-nitrided nanostructured FeAlMnC alloy. MATERIALS CHEMISTRY AND PHYSICS, 143(1), 271–274. https://doi.org/10.1016/j.matchemphys.2013.08.063
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/23203