標題: Biomechanical comparison of three stand-alone lumbar cages - a three-dimensional finite element analysis
作者: Chen, Shih-Hao
Chiang, Ming-Chieh
Lin, Jin-Fu
Lin, Shang-Chih
Hung, Ching-Hua
機械工程學系
Department of Mechanical Engineering
關鍵字: ALIF;Anterior lumbar interbody fusion;Stand-alone cage;Finite element analysis
公開日期: 2-十月-2013
摘要: Background: For anterior lumbar interbody fusion (ALIF), stand-alone cages can be supplemented with vertebral plate, locking screws, or threaded cylinder to avoid the use of posterior fixation. Intuitively, the plate, screw, and cylinder aim to be embedded into the vertebral bodies to effectively immobilize the cage itself. The kinematic and mechanical effects of these integrated components on the lumbar construct have not been extensively studied. A nonlinearly lumbar finite-element model was developed and validated to investigate the biomechanical differences between three stand-alone (Latero, SynFix, and Stabilis) and SynCage-Open plus transpedicular fixation. All four cages were instrumented at the L3-4 level. Methods: The lumbar models were subjected to the follower load along the lumbar column and the moment at the lumbar top to produce flexion (FL), extension (EX), left/right lateral bending (LLB, RLB), and left/right axial rotation (LAR, RAR). A 10 Nm moment was applied to obtain the six physiological motions in all models. The comparison indices included disc range of motion (ROM), facet contact force, and stresses of the annulus and implants. Results: At the surgical level, the SynCage-open model supplemented with transpedicular fixation decreased ROM (>76%) greatly; while the SynFix model decreased ROM 56-72%, the Latero model decreased ROM 36-91%, in all motions as compared with the INT model. However, the Stabilis model decreased ROM slightly in extension (11%), lateral bending (21%), and axial rotation (34%). At the adjacent levels, there were no obvious differences in ROM and annulus stress among all instrumented models. Conclusions: ALIF instrumentation with the Latero or SynFix cage provides an acceptable stability for clinical use without the requirement of additional posterior fixation. However, the Stabilis cage is not favored in extension and lateral bending because of insufficient stabilization.
URI: http://dx.doi.org/10.1186/1471-2474-14-281
http://hdl.handle.net/11536/23306
ISSN: 1471-2474
DOI: 10.1186/1471-2474-14-281
期刊: BMC MUSCULOSKELETAL DISORDERS
Volume: 14
Issue: 
結束頁: 
顯示於類別:期刊論文


文件中的檔案:

  1. 000328047200001.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。