Growth of high-quality epitaxial ZnO films on (10-10) sapphire by atomic layer deposition with flow-rate interruption method
檔案
- 000328094200070.pdf (801.9 KB, Adobe PDF)
日期
2013-09-01
類型
系所
期刊名稱
SURFACE & COATINGS TECHNOLOGY
卷期與頁次
第 231 卷,頁 323–327
ISSN
0257-8972
語言
英文
摘要
A novel process in an atomic layer deposition system with "flow-rate interruption" (FRI) was developed to obtain epitaxial ZnO films of high quality. The m-plane ZnO thin films were grown on m-plane sapphire substrates by atomic layer deposition with FRI or a conventional continuous-flow method at the temperature in the range of 25-260 degrees C; 200 degrees C appeared optimal. Measurements of X-ray reflectivity indicated that the thickness of ZnO films with FRI is almost twice than that grown with the continuous-flow method. The structural, optical and electrical properties were investigated with X-ray diffraction (XRD), photoluminescence and Hall measurements. The diffraction results indicated that the interrupted flow might extend the reaction of diethylzinc and water through an increased duration to improve the crystallographic quality of the films. According to the results from XRD at high resolution, to substantiate the epitaxial relation between the thin film and the substrate, an off-normal azimuthal scan along ZnO (201) demonstrated two-fold symmetry that indicated the ZnO films to be in epitaxial growth on sapphire. The photoluminescence results showed a strongly enhanced near-band-edge emission of an FRI sample, and the donor-bond exciton appearing in films also indicated superior crystalline qualities. The Hall mobility of the FRI method was up to 64.7 cm(2) V-1 s(-1). The FRI method evidently improved the structural, optical and electrical properties of the ZnO films with small consumption of precursors. (C) 2012 Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Huang, J.-M., Ku, C.-S., Lee, H.-Y., Lin, C.-M., & Chen, S.-Y. (2013). Growth of high-quality epitaxial ZnO films on (10-10) sapphire by atomic layer deposition with flow-rate interruption method. SURFACE & COATINGS TECHNOLOGY, 231, 323–327. https://doi.org/10.1016/j.surfcoat.2012.05.067
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/23328