Effects of cathode materials on the characteristics of electrolyte supported micro-tubular solid oxide fuel cells
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
40 | en_US |
dc.citation.issue |
en_US | |
dc.citation.spage |
35 | en_US |
dc.citation.volume |
253 | en_US |
dc.citation.woscount |
1 | |
dc.contributor.author |
Hsieh, Wen-Shuo | en_US |
dc.contributor.author |
Lin, Pang | en_US |
dc.contributor.author |
Wang, Sea-Fue | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:34:55Z | |
dc.date.available |
2014-12-08T15:34:55Z | |
dc.date.issued |
2014-05-01 | en_US |
dc.description.abstract |
The effects of the GDC-LSCF (Ce0.8Gd0.2O0-delta-La0.6Sr0.4Co0.2Fe0.8O3-delta) cathode layer and the GDC interlayer on the electrochemical performance of the ScSZ (Zr0.8Sc0.2O2-delta) electrolyte supported (approximate to 270 mu m) micro-tubular SOFC cells are investigated in this study. Material formulation and sintering profile for fabricating the micro-tubular SOFC cells are developed to avoid physical defects caused by the large sintering shrinkage mismatch among the layers. Cell B (with the LSCF-GDC composite cathode layer and the GDC interlayer) reports an ohmic resistance slightly higher than that of Cell A (with the GDC -La0.8Sr0 2MnO3-delta., i.e. LSM, composite cathode), while its polarization resistance emerges to be significantly smaller than that of Cell A. In terms of cell performance, Cell B demonstrates an OCV value (>1.07 V) similar to that of Cell A and a maximum power density (0.26W cm(-2)) 44.4% greater than that of Cell A (0.17 W cm(-2)) at 850 degrees C. It can thus be concluded that using the LSCF-GDC composite-cathode layer and inserting the GDC interlayer help reduce the total cell impedance, thereby improving the power density of the tubular cells. (C) 2013 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.jpowsour.2013.11.113 | en_US |
dc.identifier.issn |
0378-7753 | en_US |
dc.identifier.journal |
JOURNAL OF POWER SOURCES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.jpowsour.2013.11.113 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/23744 | |
dc.identifier.wosnumber |
WOS:000331160100005 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Solid oxide fuel cell | en_US |
dc.subject |
Tubular | en_US |
dc.subject |
Extrusion | en_US |
dc.subject |
Dip-coating | en_US |
dc.subject |
Interlayer | en_US |
dc.title |
Effects of cathode materials on the characteristics of electrolyte supported micro-tubular solid oxide fuel cells | en_US |
dc.type |
Article | en_US |
檔案
- 000331160100005.pdf (1.54 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Hsieh, W.-S., Lin, P., & Wang, S.-F. (2014). Effects of cathode materials on the characteristics of electrolyte supported micro-tubular solid oxide fuel cells. JOURNAL OF POWER SOURCES, 253, 35–40. https://doi.org/10.1016/j.jpowsour.2013.11.113
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/23744