Effects of cathode materials on the characteristics of electrolyte supported micro-tubular solid oxide fuel cells
檔案
- 000331160100005.pdf (1.54 MB, Adobe PDF)
日期
2014-05-01
類型
系所
期刊名稱
JOURNAL OF POWER SOURCES
卷期與頁次
第 253 卷,頁 35–40
ISSN
0378-7753
語言
英文
摘要
The effects of the GDC-LSCF (Ce0.8Gd0.2O0-delta-La0.6Sr0.4Co0.2Fe0.8O3-delta) cathode layer and the GDC interlayer on the electrochemical performance of the ScSZ (Zr0.8Sc0.2O2-delta) electrolyte supported (approximate to 270 mu m) micro-tubular SOFC cells are investigated in this study. Material formulation and sintering profile for fabricating the micro-tubular SOFC cells are developed to avoid physical defects caused by the large sintering shrinkage mismatch among the layers. Cell B (with the LSCF-GDC composite cathode layer and the GDC interlayer) reports an ohmic resistance slightly higher than that of Cell A (with the GDC -La0.8Sr0 2MnO3-delta., i.e. LSM, composite cathode), while its polarization resistance emerges to be significantly smaller than that of Cell A. In terms of cell performance, Cell B demonstrates an OCV value (>1.07 V) similar to that of Cell A and a maximum power density (0.26W cm(-2)) 44.4% greater than that of Cell A (0.17 W cm(-2)) at 850 degrees C. It can thus be concluded that using the LSCF-GDC composite-cathode layer and inserting the GDC interlayer help reduce the total cell impedance, thereby improving the power density of the tubular cells. (C) 2013 Elsevier B.V. All rights reserved.
所屬典藏
期刊論文引用此條目
Hsieh, W.-S., Lin, P., & Wang, S.-F. (2014). Effects of cathode materials on the characteristics of electrolyte supported micro-tubular solid oxide fuel cells. JOURNAL OF POWER SOURCES, 253, 35–40. https://doi.org/10.1016/j.jpowsour.2013.11.113
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/23744