Interfacial and mechanical characterization of yttria-stabilized zirconia (YSZ) to stainless steel joints fabricated using Ag-Cu-Ti interlayers

檔案

日期

2014-01-01

類型

期刊名稱

CERAMICS INTERNATIONAL

卷期與頁次

第 40 卷第 1 期,頁 2063–2071

ISSN

0272-8842

語言

英文

摘要

An Ag-26.7Cu-4.5Ti metallic interlayer was used to join yttria-stabilized zirconia (YSZ) and stainless steel for solid oxide fuel cell (SOFC) applications. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive spectroscopy (EDS) were used to characterize the joint microstructure. The bond strength and hermeticity of steel/metallic interlayer/YSZ joints were also evaluated. TEM analysis revealed that the Fe from the steel reacted with Ti of the interlayer to form Fe2Ti near the steel/Ag-26.7Cu-4.5Ti interface. At the Ag-26.7Cu-4.5Ti interlayer/YSZ interface, Ti2O3 and Fe2Ti4O reaction layers formed near the YSZ and the interlayer, respectively. While titanium reacted with oxygen from YSZ to form titanium oxide (Ti2O3), Fe diffused toward the YSZ to react with titanium oxide to form the Fe2Ti4O layer. The tensile and shear strengths of the joints, evaluated according to "ISO 13124" test method, were 16.7 +/- 4.8 and 40.2 +/- 8.2 MPa, respectively. Nano-indentation hardness was characterized across the steel/Ag-26.7Cu-4.5Ti interlayer/YSZ joint. The hermeticity of the joint was measured by using He leakage tests. The leak rate of the joined assembly was 1.5 +/- 1.1 x 10(-9) mbar l/s, indicating good hermeticity of joints. (C) 2013 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Lin, K.-L., Singh, M., Asthana, R., & Lin, C.-H. (2014). Interfacial and mechanical characterization of yttria-stabilized zirconia (YSZ) to stainless steel joints fabricated using Ag-Cu-Ti interlayers. CERAMICS INTERNATIONAL, 40(1), 2063–2071. https://doi.org/10.1016/j.ceramint.2013.07.119

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/23872