Performance and two-phase flow pattern for micro flat heat pipes

檔案

日期

2014-10-01

類型

期刊名稱

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

卷期與頁次

第 77 卷,頁 1115–1123

ISSN

0017-9310

語言

英文

摘要

In this study, thermal performance and flow visualization of a double layer flat micro vapor chamber are reported. Two micro vapor chambers having pin fin and pin fin array support structure are fabricated and tested. The micro vapor chambers are composed of silicon and glass wafers having an overall size of 35 x 40 x 1.525 mm. Test results show that both the pin fin and pin fin array vapor chambers show an appreciably lower thermal resistance as compared to the solid silicon counterpart, the thermal resistance of the pin fin vapor chamber is about 52-60% of the solid silicon whereas the corresponding thermal resistance of pin fin array is only 17-20% of the solid silicon. The thermal resistance of the pin fin vapor chamber is moderately increased subject to the increase of supplied power whereas opposite trend is encountered for the pin fin array. The phenomenon is associated with the influence of dry-out phenomenon. It is found that the pin fin array vapor chamber is still in function even for an upside-down arrangement. The thermal resistance, however, is reduced with the rise of tilt angle, and the vertical arrangement gives the lowest thermal resistance. However, the thermal resistance is considerably increased if the heat source is placed upwards, and the corresponding thermal resistance for an upside-down heat source can be threefold higher than that of the vertical arrangement. (C) 2014 Elsevier Ltd. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Yang, K.-S., Lin, C.-C., Shyu, J.-C., Tseng, C.-Y., & Wang, C.-C. (2014). Performance and two-phase flow pattern for micro flat heat pipes. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 77, 1115–1123. https://doi.org/10.1016/j.ijheatmasstransfer.2014.06.056

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/25024