A Multi-Touch Interface Circuit for a Large-Sized Capacitive Touch Panel

檔案

日期

2010

類型

期刊名稱

2010 IEEE SENSORS

卷期與頁次

頁 309–314

ISSN

1930-0395

ISBN

978-1-4244-8168-2

語言

英文

摘要

This study presents a multi-touch sensing circuit for large-sized (more than 12 inches) capacitive touch panel. A new AC sensing technique is developed to enable the touch sensing in a large-sized capacitive touch panel. This novel designs of multi-touch sensing circuit lies in the operation principles through a 4X4 ITO film sensor array, a low-disturbance array circuit, a capacitance to voltage converter circuit and the proposed design procedure of chip parameters by circuit simulation. Furthermore, the sequence control for the array is generated by an FPGA module to accomplish the operation of the whole circuit. Some of objectives are to reduce environmental disturbance of the panel and to distinguish multi-touching locations from the panel. The corresponding output voltages of multi-touch sensing circuit are output in proportional to location touched by a human finger. Finally, the whole circuit is implemented by using TSMC 0.35 mu m 2P4M process. The circuit output voltages are used to distinguish touch locations by a proposed algorithm.

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Ruan, J.-Y., Chao, P. C. P., & Chen, W.-D. (2010). A Multi-Touch Interface Circuit for a Large-Sized Capacitive Touch Panel. 2010 IEEE SENSORS, 309–314. https://doi.org/10.1109/ICSENS.2010.5689881

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/26798