Substrate-triggered SCR device for on-chip ESD protection in fully silicided sub-0.25-mu m CMOS process
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
405 | en_US |
dc.citation.issue |
2 | en_US |
dc.citation.spage |
397 | en_US |
dc.citation.volume |
50 | en_US |
dc.citation.woscount |
23 | |
dc.contributor.author |
Ker, MD | en_US |
dc.contributor.author |
Hsu, KC | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:41:19Z | |
dc.date.available |
2014-12-08T15:41:19Z | |
dc.date.issued |
2003-02-01 | en_US |
dc.description.abstract |
The turn-on mechanism of a silicon-controlled rectifier (SCR) device is essentially a current triggering event. While a current is applied to the, base or - substrate of the SCR device, it can be quickly triggered, into its latching state. In this paper, a novel design concept to turn on the SCR device by applying the substrate-triggered technique is first proposed for effective on-chip electrostatic discharge (ESD) protection. This novel substrate-triggered SCR device has the advantages of controllable switching voltage and adjustable holding voltage and is compatible with, general CMOS processes without extra process modification such as the silicide-blocking mask and ESD implantation. Moreover, the substrate-triggered SCR, devices can be stacked in ESD protection circuits to avoid the translient-induced latch-up issue. The turn-on time of the proposed substrate-triggered SCR devices, can be reduced from 27.4 to 7.8 ns by the substrate-triggering, technique. The substrate-triggered SCR device with a small active area of only 20 mum x 20 mum can sustain the HBM ESD stress of 6.5 kV in a fully silicided 0.25-mum CMOS process. | en_US |
dc.identifier.doi |
10.1109/TED.2003.809028 | en_US |
dc.identifier.issn |
0018-9383 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON ELECTRON DEVICES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/TED.2003.809028 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/28113 | |
dc.identifier.wosnumber |
WOS:000182496000020 | |
dc.language.iso |
en_US | en_US |
dc.subject |
electrostatic discharge (ESD) | en_US |
dc.subject |
ESD protection circuit | en_US |
dc.subject |
silicon controlled rectifier (SCR) | en_US |
dc.subject |
substrate-triggered technique | en_US |
dc.title |
Substrate-triggered SCR device for on-chip ESD protection in fully silicided sub-0.25-mu m CMOS process | en_US |
dc.type |
Article | en_US |
檔案
- 000182496000020.pdf (607.8 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Ker, M., & Hsu, K. (2003). Substrate-triggered SCR device for on-chip ESD protection in fully silicided sub-0.25-mu m CMOS process. IEEE TRANSACTIONS ON ELECTRON DEVICES, 50(2), 397–405. https://doi.org/10.1109/TED.2003.809028
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28113