Electroluminescence characteristics of aromatic polyimides by vapor deposition polymerization

檔案

日期

2003

類型

期刊名稱

JOURNAL OF POLYMER RESEARCH-TAIWAN

卷期與頁次

第 10 卷第 1 期,頁 7–12

ISSN

1022-9760

語言

英文

摘要

Light emitting polyimide (PI) thin films are successfully prepared from two kinds of diamines: 2,5-Bis(4-aminophenyl)-1,3,4-oxadiazole (BAO) and 4,4'-(9-Fluorenylidene)dianiline (BAPF) reacting with 4,4'-(Hexafluoroisopropylidene)diphthalic anhydride (6FDA) by vapor deposition polymerization (VDP). We succeed to reduce the thickness of the thin polyimide film to 150 Angstrom, and the threshold voltage of BAO-6FDA and BAPF-6FDA PI light-emitting diodes to 4.5 V and 6.5 V respectively. The root mean square of the surface roughness of the BAO-6FDA and BAPF-6FDA PI films are 8.8 Angstrom and 4.7 Angstrom respectively. But that of the BAO-6FDA film from wet coating process is 37.1 Angstrom. Apparently, VDP process is the better way to produce smooth polyimide film. The BAO-6FDA LED film emits a broader electroluminscence (EL) band, covering the full range of visible light (400 nm to 700 nm), than the BAPF-6FDA LED. However, the electroluminescence efficiency of BAPF-6FDA LED device is better than BAO-6FDA LED device. It is due to the better balance on the hole and electron injection in the former and better intermolecular charge transfer.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Hsu, S., Whang, W., & Chen, S. (2003). Electroluminescence characteristics of aromatic polyimides by vapor deposition polymerization. JOURNAL OF POLYMER RESEARCH-TAIWAN, 10(1), 7–12. https://doi.org/10.1023/A:1021399617498

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28260