Substrate-triggered ESD clamp devices for use in power-rail ESD clamp circuits
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
734 | en_US |
dc.citation.issue |
5 | en_US |
dc.citation.spage |
721 | en_US |
dc.citation.volume |
46 | en_US |
dc.citation.woscount |
10 | |
dc.contributor.author |
Ker, MD | en_US |
dc.contributor.author |
Chen, TY | en_US |
dc.contributor.author |
Wu, CY | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:42:25Z | |
dc.date.available |
2014-12-08T15:42:25Z | |
dc.date.issued |
2002-05-01 | en_US |
dc.description.abstract |
Ne electrostatic discharge (ESD) clamp devices for using in power-rail ESD clamp circuits with the substrate-triggered technique ire proposed to improve ESD level in a limited silicon area. The parasitic n-p-n and p-n-p bipolar junction transistors (BJTs) in the CMOS devices ire used to form the substrate-triggered devices Cor ESD protection. Four substrate-triggered de-ices are proposed and investigated in this work, which are named as the substrate-triggered lateral BJT, the substrate-triggered vertical BJT, the substrate-triggered double BJT and the double-triggered double BJT. An RC-based ESD-detection Circuit Is used to generate the triggering Current to turn on the proposed substrate-triggered devices. In order to trigger on the parasitic bipolar transistors more effectively, the symmetric multiple-cell square-type layout method is used to realize these substrate-triggered devices. The power-rail ESD clamp circuits, with such substrate-triggered devices have been fabricated in a 0.6-mum CMOS process. Experimental results have shown that the substrate-triggered device with double-BJT Structure can provide 200%, higher ESD robustness in per silicon area, as compared to the NMOS with the traditional gate-driven design, (C) 2002 Elsevier Science Ltd. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/S0038-1101(01)00317-3 | en_US |
dc.identifier.issn |
0038-1101 | en_US |
dc.identifier.journal |
SOLID-STATE ELECTRONICS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/S0038-1101(01)00317-3 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/28805 | |
dc.identifier.wosnumber |
WOS:000175658000019 | |
dc.language.iso |
en_US | en_US |
dc.subject |
electrostatic discharge | en_US |
dc.subject |
substrate-triggered technique | en_US |
dc.subject |
electrostatic discharge clamp circuit | en_US |
dc.subject |
secondary breakdown current (lt(2)) | en_US |
dc.subject |
bipolar junction transistor | en_US |
dc.title |
Substrate-triggered ESD clamp devices for use in power-rail ESD clamp circuits | en_US |
dc.type |
Article | en_US |
檔案
- 000175658000019.pdf (890.5 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Ker, M., Chen, T., & Wu, C. (2002). Substrate-triggered ESD clamp devices for use in power-rail ESD clamp circuits. SOLID-STATE ELECTRONICS, 46(5), 721–734. https://doi.org/10.1016/S0038-1101(01)00317-3
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28805