Substrate-triggered ESD clamp devices for use in power-rail ESD clamp circuits

檔案

日期

2002-05-01

類型

期刊名稱

SOLID-STATE ELECTRONICS

卷期與頁次

第 46 卷第 5 期,頁 721–734

ISSN

0038-1101

語言

英文

摘要

Ne electrostatic discharge (ESD) clamp devices for using in power-rail ESD clamp circuits with the substrate-triggered technique ire proposed to improve ESD level in a limited silicon area. The parasitic n-p-n and p-n-p bipolar junction transistors (BJTs) in the CMOS devices ire used to form the substrate-triggered devices Cor ESD protection. Four substrate-triggered de-ices are proposed and investigated in this work, which are named as the substrate-triggered lateral BJT, the substrate-triggered vertical BJT, the substrate-triggered double BJT and the double-triggered double BJT. An RC-based ESD-detection Circuit Is used to generate the triggering Current to turn on the proposed substrate-triggered devices. In order to trigger on the parasitic bipolar transistors more effectively, the symmetric multiple-cell square-type layout method is used to realize these substrate-triggered devices. The power-rail ESD clamp circuits, with such substrate-triggered devices have been fabricated in a 0.6-mum CMOS process. Experimental results have shown that the substrate-triggered device with double-BJT Structure can provide 200%, higher ESD robustness in per silicon area, as compared to the NMOS with the traditional gate-driven design, (C) 2002 Elsevier Science Ltd. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Ker, M., Chen, T., & Wu, C. (2002). Substrate-triggered ESD clamp devices for use in power-rail ESD clamp circuits. SOLID-STATE ELECTRONICS, 46(5), 721–734. https://doi.org/10.1016/S0038-1101(01)00317-3

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/28805