The characteristics and engineering properties of dry-mix/steam-injection concrete

檔案

日期

2001-04-01

作者

類型

期刊名稱

CEMENT AND CONCRETE RESEARCH

卷期與頁次

第 31 卷第 4 期,頁 609–619

ISSN

0008-8846

語言

英文

摘要

This study aims to investigate the characteristics and engineering properties of the dry-mix/steam-injection method (DMSIM) which was developed to overcome difficulties involved in vacuum conditions of the lunar environment. A comparison was made to examine the differences in the hydration process, mechanical properties and the composition of hydration products between DMSIM and the normal-temperature wet-mix method (NTWMM). In DMSIM. when dry cement particles come in contact with steam, heal immediately transfers from the steam to the cement, with part of the steam being forced into the inner regions of the cement particles via the micropores. As cement particles gain activation energy and moisture condensed from steam? they undergo rapid and complete hydration. Test results showed that the optimal steaming temperature for dry-mix samples of cement and standard sand is 180-200 degreesC and the optimal steaming scenario for 10 cm(3) samples of concrete is at 200 degreesC for 18 h. The present DMSIM has advantages of lower cement content, shorter hardening time and higher concrete strengths, as compared to NTWMM. (C) 2001 Elsevier Science Ltd. Ail rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Su, N., & Peng, Y. (2001). The characteristics and engineering properties of dry-mix/steam-injection concrete. CEMENT AND CONCRETE RESEARCH, 31(4), 609–619. https://doi.org/10.1016/S0008-8846(01)00460-4

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29725