Effects of the catalyst pretreatment on CO2 sensors made by carbon nanotubes

檔案

日期

2008-04-01

期刊名稱

DIAMOND AND RELATED MATERIALS

卷期與頁次

第 17 卷第 4-5 期,頁 624–627

ISSN

0925-9635

語言

英文

摘要

A novel CO2 sensor was made by carbon nanotubes (CNTs). The CNTs were synthesized by catalystic thermal chemical vapour deposition at 700 degrees C. Prior to the synthesis, the Fe catalysts were pretreated by H-2 plasma for different times. Two terminal resistance of the as-grown CNTs mat was measured under different CO2 concentrations. It was found that without the catalyst pretreatment, the sensitivity was about 4% when the CNTs mat was exposed to 800 mTorr CO2 concentration. However, with various catalyst pretreatment times of 5, 10, 15 and 20 min, the sensitivity was 3.69%, 6.27%, 9.54%, and 12.1%, respectively. The Raman spectroscopy showed the I-D/I-G decreased from 0.668 to 0.539 as the catalyst pretreatment time increased. The XPS also showed the correlation of surface chemical components with the Raman spectroscopy. The Fe catalyst H-2 plasma pretreatment affected both the graphitization and surface binding sites of CNTs. (C) 2007 Elsevier B.V. All rights reserved.

所屬典藏

會議論文
顯示完整詮釋資料 統計資料

引用此條目

Huang, C. S., Huang, B. R., Hsiao, C. H., Yeh, C. Y., Huang, C. C., & Jang, Y. H. (2008). Effects of the catalyst pretreatment on CO2 sensors made by carbon nanotubes. DIAMOND AND RELATED MATERIALS, 17(4-5), 624–627. https://doi.org/10.1016/j.diamond.2007.08.039

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29987