Control system design for a rapid thermal processing system
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
129 | en_US |
dc.citation.issue |
1 | en_US |
dc.citation.spage |
122 | en_US |
dc.citation.volume |
9 | en_US |
dc.citation.woscount |
9 | |
dc.contributor.author |
Lin, CA | en_US |
dc.contributor.author |
Jan, YK | en_US |
dc.contributor.department |
電控工程研究所 | zh_TW |
dc.contributor.department |
Institute of Electrical and Control Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:44:25Z | |
dc.date.available |
2014-12-08T15:44:25Z | |
dc.date.issued |
2001-01-01 | en_US |
dc.description.abstract |
This paper proposes a control system design for a rapid thermal processing (RTP) system, which has four circular concentric lamp zones and four temperature sensors. The control system consists of a least square feedforward controller and an output feedback proportional plus integral (PI) controller. The goal is to maintain uniform temperature tracking for typical ramp-up and hold-steady profiles. A high-order nonlinear model describing the temperature dynamics of the rapid thermal processing (RTP) system is used for the feedforward controller design. A balanced reduced model, obtained from a linear model around a desired uniform steady-state temperature, is used for the design of the multiinput-multioutput (MIMO) PI controller. The PI controller gain matrices are designed using an LQR-based procedure. Tradeoff between robustness and performance of the system is discussed, Simulation results show the control system designed yields robust temperature tracking with good uniformity for a wide temperature range. | en_US |
dc.identifier.doi |
10.1109/87.896753 | en_US |
dc.identifier.issn |
1063-6536 | en_US |
dc.identifier.journal |
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/87.896753 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/29999 | |
dc.identifier.wosnumber |
WOS:000166627500015 | |
dc.language.iso |
en_US | en_US |
dc.subject |
output feedback | en_US |
dc.subject |
proportional plus integral (PI) controller | en_US |
dc.subject |
rapid thermal processing (RTP) | en_US |
dc.subject |
reduced order system | en_US |
dc.subject |
single-wafer process | en_US |
dc.subject |
temperature control | en_US |
dc.subject |
temperature measurement | en_US |
dc.title |
Control system design for a rapid thermal processing system | en_US |
dc.type |
Article | en_US |
檔案
- 000166627500015.pdf (181.7 KB, Adobe PDF)
所屬典藏: 期刊論文