Control system design for a rapid thermal processing system

檔案

日期

2001-01-01

類型

期刊名稱

IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY

卷期與頁次

第 9 卷第 1 期,頁 122–129

ISSN

1063-6536

語言

英文

摘要

This paper proposes a control system design for a rapid thermal processing (RTP) system, which has four circular concentric lamp zones and four temperature sensors. The control system consists of a least square feedforward controller and an output feedback proportional plus integral (PI) controller. The goal is to maintain uniform temperature tracking for typical ramp-up and hold-steady profiles. A high-order nonlinear model describing the temperature dynamics of the rapid thermal processing (RTP) system is used for the feedforward controller design. A balanced reduced model, obtained from a linear model around a desired uniform steady-state temperature, is used for the design of the multiinput-multioutput (MIMO) PI controller. The PI controller gain matrices are designed using an LQR-based procedure. Tradeoff between robustness and performance of the system is discussed, Simulation results show the control system designed yields robust temperature tracking with good uniformity for a wide temperature range.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Lin, C., & Jan, Y. (2001). Control system design for a rapid thermal processing system. IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 9(1), 122–129. https://doi.org/10.1109/87.896753

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/29999