Flip-flop selection for mixed scan and reset design based on test generation and structure of sequential circuits
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
702 | en_US |
dc.citation.issue |
5 | en_US |
dc.citation.spage |
687 | en_US |
dc.citation.volume |
16 | en_US |
dc.citation.woscount |
0 | |
dc.contributor.author |
Liang, HC | en_US |
dc.contributor.author |
Lee, CL | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:44:54Z | |
dc.date.available |
2014-12-08T15:44:54Z | |
dc.date.issued |
2000-09-01 | en_US |
dc.description.abstract |
In this paper, a novel mixed selection methodology using flip-flops for scan and reset design is proposed. The method runs test generation fora sequential circuit to obtain reachable states of flip-flops and required states for hard-to-detect faults. The circuit is also explored so as to acquire the structural connection relationship among the flip-flops. By analyzing these three sets of information, the flip-flops can be arranged in an appropriate order for mixed partial scan and reset selection. Instead of selecting the best flip-flop to revise the circuit for the next test generation, we give first priority to independent flip-flops each time in order to reduce the number of iterations. Experimental results show that this method can achieve higher testability with fewer scan/reset flip-flops than can either the scan only or the previous mixed scan/reset methods. | en_US |
dc.identifier.issn |
1016-2364 | en_US |
dc.identifier.journal |
JOURNAL OF INFORMATION SCIENCE AND ENGINEERING | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/30315 | |
dc.identifier.wosnumber |
WOS:000089367400003 | |
dc.language.iso |
en_US | en_US |
dc.subject |
partial scan | en_US |
dc.subject |
partial reset | en_US |
dc.subject |
reachable states | en_US |
dc.subject |
test generation | en_US |
dc.subject |
design for testability | en_US |
dc.title |
Flip-flop selection for mixed scan and reset design based on test generation and structure of sequential circuits | en_US |
dc.type |
Article | en_US |
檔案
- 000089367400003.pdf (175.0 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Liang, H., & Lee, C. (2000). Flip-flop selection for mixed scan and reset design based on test generation and structure of sequential circuits. JOURNAL OF INFORMATION SCIENCE AND ENGINEERING, 16(5), 687–702. https://ir.lib.nycu.edu.tw/handle/11536/30315
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/30315