High temperature formed SiGeP-MOSFET's with good device characteristics
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
352 | en_US |
dc.citation.issue |
7 | en_US |
dc.citation.spage |
350 | en_US |
dc.citation.volume |
21 | en_US |
dc.citation.woscount |
11 | |
dc.contributor.author |
Wu, YH | en_US |
dc.contributor.author |
Chin, A | en_US |
dc.contributor.department |
電子工程學系及電子研究所 | zh_TW |
dc.contributor.department |
Department of Electronics Engineering and Institute of Electronics | en_US |
dc.date.accessioned |
2014-12-08T15:45:06Z | |
dc.date.available |
2014-12-08T15:45:06Z | |
dc.date.issued |
2000-07-01 | en_US |
dc.description.abstract |
We have used a simple process to fabricate Si0.3Ge0.7/Si p-MOSFET's. The Si0.3Ge0.7 is formed using deposited Ge followed by 950 degrees C rapid thermal annealing and solid phase epitaxy that is process compatible with existing VLSI. Hole mobility of 250 cm(2)/Vs is obtained from Si0.3Ge0.7 p-MOSFET that is similar to two times higher than Si control devices and results in a consequent substantially higher current drive. The 228 Angstrom Si0.3Ge0.7 thermal oxide grown at 1000 degrees C has a high breakdown field of 15 MV/cm, low interface trap density (D-it) of 1.5 x 10(11) eV(-1) cm(-2), and low oxide charge of 7.2 x 10(10) cm(-2). The source-drain junction leakage after implantation and 950 degrees C RTA is also comparable with Si counterpart. | en_US |
dc.identifier.doi |
10.1109/55.847377 | en_US |
dc.identifier.issn |
0741-3106 | en_US |
dc.identifier.journal |
IEEE ELECTRON DEVICE LETTERS | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1109/55.847377 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/30424 | |
dc.identifier.wosnumber |
WOS:000087898300008 | |
dc.language.iso |
en_US | en_US |
dc.subject |
hole mobility | en_US |
dc.subject |
P-MOSFET | en_US |
dc.subject |
reliability | en_US |
dc.subject |
SiGe | en_US |
dc.title |
High temperature formed SiGeP-MOSFET's with good device characteristics | en_US |
dc.type |
Article | en_US |
檔案
- 000087898300008.pdf (59.6 KB, Adobe PDF)
所屬典藏: 期刊論文