High temperature formed SiGeP-MOSFET's with good device characteristics

檔案

日期

2000-07-01

作者

類型

期刊名稱

IEEE ELECTRON DEVICE LETTERS

卷期與頁次

第 21 卷第 7 期,頁 350–352

ISSN

0741-3106

語言

英文

摘要

We have used a simple process to fabricate Si0.3Ge0.7/Si p-MOSFET's. The Si0.3Ge0.7 is formed using deposited Ge followed by 950 degrees C rapid thermal annealing and solid phase epitaxy that is process compatible with existing VLSI. Hole mobility of 250 cm(2)/Vs is obtained from Si0.3Ge0.7 p-MOSFET that is similar to two times higher than Si control devices and results in a consequent substantially higher current drive. The 228 Angstrom Si0.3Ge0.7 thermal oxide grown at 1000 degrees C has a high breakdown field of 15 MV/cm, low interface trap density (D-it) of 1.5 x 10(11) eV(-1) cm(-2), and low oxide charge of 7.2 x 10(10) cm(-2). The source-drain junction leakage after implantation and 950 degrees C RTA is also comparable with Si counterpart.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Wu, Y., & Chin, A. (2000). High temperature formed SiGeP-MOSFET's with good device characteristics. IEEE ELECTRON DEVICE LETTERS, 21(7), 350–352. https://doi.org/10.1109/55.847377

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/30424