Fast Mode-Switching Technique in Hrbrid-Mode Operation
檔案
本條目沒有附加檔案。
日期
2008
類型
系所
期刊名稱
2008 51ST MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS 1 AND 2
卷期與頁次
頁 9–12
ISSN
1548-3746
ISBN
978-1-4244-2166-4
語言
英文
摘要
A fast mode-switching technique between pulse width modulation (PWM) and pulse frequency modulation (PFM) modes Is proposed to keep high efficiency over wide load range. Load dependent zero-current detector (ZCD) can effectively speed up the transition from PWM to PFM mode. Especially, the overshoot voltage can be minimized by using the reversed current provided by the ZCD circuit. Furthermore, the undershoot voltage of the transition from PFM to PWM mode can be reduced because the recovery time can be reduced by restoring the output voltage of the error amplifier. Thus, the efficiency of current mode DC-DC buck converter is higher than 88% at light loads and the recovery time is smaller than 35 mu s when load current changes from 500mA to 10mA suddenly.
所屬典藏
會議論文引用此條目
Chen, C.-L., Hsieh, W.-L., Huang, H.-H., & Chen, K.-H. (2008). Fast Mode-Switching Technique in Hrbrid-Mode Operation. 2008 51ST MIDWEST SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS 1 AND 2, 9–12. https://ir.lib.nycu.edu.tw/handle/11536/31497
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/31497