A VLSI architecture design for dual-mode QAM and VSB digital CATV transceiver
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2356 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
2351 | en_US |
dc.citation.volume |
E81B | en_US |
dc.contributor.author |
Shiue, MT | en_US |
dc.contributor.author |
Wang, CK | en_US |
dc.contributor.author |
Way, WI | en_US |
dc.contributor.department |
電信工程研究所 | zh_TW |
dc.contributor.department |
Institute of Communications Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:47:14Z | |
dc.date.available |
2014-12-08T15:47:14Z | |
dc.date.issued |
1998-12-01 | en_US |
dc.description.abstract |
In this paper, a transceiver VLSI architecture is proposed for high speed digital CATV modems, which can perform both the QAM and the VSB transmissions [1], [2]. The proposed architecture of all-digital dual-mode QAM/VSB receiver consists of digital AGC, digital demodulator, fractionally spaced blind equalizer and DFE, digital carrier recovery, and symbol timing recovery. Finite word-length simulation results show that the proposed architecture can achieve an SNR 29 dB for both the 64-QAM mode and 8-VSB mode when the 10 bit ADC input signal SNR is 36 dB, and there are +/-6 kHz of carrier frequency offset, +/- 110 ppm of symbol rate offset, and -82 dBc carrier phase-jitter at 10 kHz away from the nominal carrier frequency. | en_US |
dc.identifier.issn |
0916-8516 | en_US |
dc.identifier.journal |
IEICE TRANSACTIONS ON COMMUNICATIONS | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/31690 | |
dc.identifier.wosnumber |
WOS:000077770300014 | |
dc.language.iso |
en_US | en_US |
dc.subject |
QAM | en_US |
dc.subject |
VSB | en_US |
dc.subject |
AGC | en_US |
dc.subject |
carrier recovery | en_US |
dc.subject |
timing recovery | en_US |
dc.subject |
fractionally spaced blind equalizer and DFE | en_US |
dc.title |
A VLSI architecture design for dual-mode QAM and VSB digital CATV transceiver | en_US |
dc.type |
Article; Proceedings Paper | en_US |
檔案
本條目沒有附加檔案。
所屬典藏: 會議論文
引用此條目
Shiue, M., Wang, C., & Way, W. (1998). A VLSI architecture design for dual-mode QAM and VSB digital CATV transceiver. IEICE TRANSACTIONS ON COMMUNICATIONS, E81B(12), 2351–2356. https://ir.lib.nycu.edu.tw/handle/11536/31690
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/31690