An analysis of the formability of aluminum/copper clad metals with different thicknesses by the finite element method and experiment
檔案
- 000280846600018.pdf (622.0 KB, Adobe PDF)
日期
2010-08-01
類型
期刊名稱
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
卷期與頁次
第 49 卷第 9-12 期,頁 1029–1036
ISSN
0268-3768
語言
英文
摘要
In this research, the possibility of applying forming limit diagrams to the formability and fracture prediction of clad metal sheets is examined. The forming limits of clad metal sheets with different thickness combinations (e.g., A1050 1.0, 1.5, 2.0 mm/C1100 1.0 mm) are investigated via forming limits test (punch stretching tests). The true stress-strain curves of Al/Cu clad metal sheets are obtained through tensile tests. Using the experimental forming limit diagrams and the stress-strain curves, the fracture prediction of clad metal sheets are simulated by finite element analysis. Moreover, deep drawing tests are carried out to compare the experimental with the numerical results. These results can verify the accuracy of finite element model. Finally, significant differences in formability are found, and comparisons of the fracture prediction of clad metals with different initial thickness ratios are analyzed both numerically and experimentally.
所屬典藏
期刊論文引用此條目
Tseng, H.-C., Hung, C., & Huang, C.-C. (2010). An analysis of the formability of aluminum/copper clad metals with different thicknesses by the finite element method and experiment. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 49(9-12), 1029–1036. https://doi.org/10.1007/s00170-009-2446-4
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/32347