Design optimization of scroll compressor applied for frictional losses evaluation
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
624 | en_US |
dc.citation.issue |
3 | en_US |
dc.citation.spage |
615 | en_US |
dc.citation.volume |
33 | en_US |
dc.citation.woscount |
5 | |
dc.contributor.author |
Liu, Yangguang | en_US |
dc.contributor.author |
Hung, Chinghua | en_US |
dc.contributor.author |
Chang, Yuchoung | en_US |
dc.contributor.department |
機械工程學系 | zh_TW |
dc.contributor.department |
Department of Mechanical Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:06:58Z | |
dc.date.available |
2014-12-08T15:06:58Z | |
dc.date.issued |
2010-05-01 | en_US |
dc.description.abstract |
This paper develops a design optimization procedure in scroll-type compressor (STC). By integrating the verified STC simulation model with an optimum solver, a frictional losses reduced problem of bearing components has been investigated. After the optimum search, the frictional losses can be reduced in range of 14.1-18.1% at all testing conditions with specified constraints. Herein, the design modifications of crank and upper bearings are compromised between reduction of frictional losses and maintenance of hydrodynamic lubrication. In addition, the narrower and shorter design of lower bearing and smaller one of thrust bearing can reduce frictional losses too. Furthermore, wider selection of materials in all the bearings can be adopted with the satisfied strength constraint. By using this procedure, various optimum combinations of parameters can be found for different STC design considerations. (C) 2010 Elsevier Ltd and IIR. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.ijrefrig.2009.12.015 | en_US |
dc.identifier.issn |
0140-7007 | en_US |
dc.identifier.journal |
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.ijrefrig.2009.12.015 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/5449 | |
dc.identifier.wosnumber |
WOS:000277936500020 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Scroll compressor | en_US |
dc.subject |
Modelling | en_US |
dc.subject |
Simulation | en_US |
dc.subject |
Loss | en_US |
dc.subject |
Friction | en_US |
dc.title |
Design optimization of scroll compressor applied for frictional losses evaluation | en_US |
dc.type |
Article | en_US |
檔案
- 000277936500020.pdf (1.13 MB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Liu, Y., Hung, C., & Chang, Y. (2010). Design optimization of scroll compressor applied for frictional losses evaluation. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 33(3), 615–624. https://doi.org/10.1016/j.ijrefrig.2009.12.015
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/5449