Title: Design optimization of scroll compressor applied for frictional losses evaluation
Authors: Liu, Yangguang
Hung, Chinghua
Chang, Yuchoung
機械工程學系
Department of Mechanical Engineering
Keywords: Scroll compressor;Modelling;Simulation;Loss;Friction
Issue Date: 1-May-2010
Abstract: This paper develops a design optimization procedure in scroll-type compressor (STC). By integrating the verified STC simulation model with an optimum solver, a frictional losses reduced problem of bearing components has been investigated. After the optimum search, the frictional losses can be reduced in range of 14.1-18.1% at all testing conditions with specified constraints. Herein, the design modifications of crank and upper bearings are compromised between reduction of frictional losses and maintenance of hydrodynamic lubrication. In addition, the narrower and shorter design of lower bearing and smaller one of thrust bearing can reduce frictional losses too. Furthermore, wider selection of materials in all the bearings can be adopted with the satisfied strength constraint. By using this procedure, various optimum combinations of parameters can be found for different STC design considerations. (C) 2010 Elsevier Ltd and IIR. All rights reserved.
URI: http://dx.doi.org/10.1016/j.ijrefrig.2009.12.015
http://hdl.handle.net/11536/5449
ISSN: 0140-7007
DOI: 10.1016/j.ijrefrig.2009.12.015
Journal: INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
Volume: 33
Issue: 3
Begin Page: 615
End Page: 624
Appears in Collections:Articles


Files in This Item:

  1. 000277936500020.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.