Optimization of the GTA Welding Process Using Combination of the Taguchi Method and a Neural-Genetic Approach
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
636 | en_US |
dc.citation.issue |
7 | en_US |
dc.citation.spage |
631 | en_US |
dc.citation.volume |
25 | en_US |
dc.citation.woscount |
10 | |
dc.contributor.author |
Lin, Hsuan-Liang | en_US |
dc.contributor.author |
Chou, Chang-Pin | en_US |
dc.contributor.department |
交大名義發表 | zh_TW |
dc.contributor.department |
National Chiao Tung University | en_US |
dc.date.accessioned |
2014-12-08T15:07:48Z | |
dc.date.available |
2014-12-08T15:07:48Z | |
dc.date.issued |
2010 | en_US |
dc.description.abstract |
Many parameters affect the quality of the gas tungsten arc (GTA) welding process. It is not easy to obtain optimal parameters of the GTA welding process. This paper applies an integrated approach using the Taguchi method, artificial neural network (ANN), and genetic algorithm (GA) to optimize the weld bead geometry of GTA welding specimens. The proposed approach consists of two stages. First stage executes initial optimization via Taguchi method to construct a database for the ANN. In second stage, an ANN is used to provide the nonlinear relationship between factors and the response. Then, a GA is applied to obtain the optimal factor settings. The experimental results showed that the weld bead geometry of the optimal welding parameters via the proposed approach is slender than apply Taguchi method only. | en_US |
dc.identifier.doi |
10.1080/10426910903365711 | en_US |
dc.identifier.issn |
1042-6914 | en_US |
dc.identifier.journal |
MATERIALS AND MANUFACTURING PROCESSES | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1080/10426910903365711 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/6131 | |
dc.identifier.wosnumber |
WOS:000280678300014 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Gas tungsten arc welding | en_US |
dc.subject |
Genetic algorithm | en_US |
dc.subject |
Neural networks | en_US |
dc.subject |
Taguchi method | en_US |
dc.title |
Optimization of the GTA Welding Process Using Combination of the Taguchi Method and a Neural-Genetic Approach | en_US |
dc.type |
Article | en_US |
檔案
- 000280678300014.pdf (806.6 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lin, H.-L., & Chou, C.-P. (2010). Optimization of the GTA Welding Process Using Combination of the Taguchi Method and a Neural-Genetic Approach. MATERIALS AND MANUFACTURING PROCESSES, 25(7), 631–636. https://doi.org/10.1080/10426910903365711
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/6131