Rapid Fabrication of Cylindrical Colloidal Crystals and Their Inverse Opals

檔案

日期

2010

類型

期刊名稱

JOURNAL OF THE ELECTROCHEMICAL SOCIETY

卷期與頁次

第 157 卷第 3 期,頁 P23–P27

ISSN

0013-4651

語言

英文

摘要

We employed an electrophoretic deposition technique to prepare cylindrical colloidal crystals (CCCs) from polystyrene (PS) microspheres of 460 and 660 nm diameters using a carbon fiber (CF) with 7 mu m diameter as the substrate. Measurements on the CCC diameter demonstrated growth rates that slowed down as time progressed. Scanning electron microscope images confirmed that the CCCs of 460 nm microspheres formed a face-centered cubic close-packed lattice, whereas an amorphous structure appeared for the CCCs of 660 nm. Subsequently, both CCCs underwent a potentiostatic electroplating to deposit Ni into the interstitial voids among the PS microspheres. After chemical removal of the PS microspheres, we fabricated cylindrical inverse opals (CIOs) in various diameters. As expected, better crystallinity was found on the CIOs of 460 nm microspheres as opposed to the 660 nm ones. The electrical resistivity for both CIOs exhibited a substantial reduction over that of the CF. Our CCCs and CIOs revealed considerable structure stability with excellent surface uniformity. The fabrication scheme enables rapid preparations of CCCs and CIOs in desirable lengths and diameters.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Lai, C.-H., Huang, Y.-J., Wu, P.-W., & Chen, L.-Y. (2010). Rapid Fabrication of Cylindrical Colloidal Crystals and Their Inverse Opals. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 157(3), P23–P27. https://doi.org/10.1149/1.3280268

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/6196